INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
FOR
MST SERIES
03-190 Recommended Grease Table
04-150 Gear Drive Operation
05-150 Maintenance Gear Drive MST
MAGNA-SAFE MST
Mixers Bulletin 04-150
07/1/03
Gear Drive Operation
Electric motors furnished on agitators are designed to deliver their rated output when properly installed and maintained.
Gearing and bearings are lubricated. The gear drive has been filled with the proper amount and type of lubricant before operation. Refer to the lubrication section of this manual. Improper lubrication will result in damage to gearing and bearings in a very short time.