INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
FOR
MSS SERIES
02-051 Installation - Single Angular contact bearing
03-190 Recommended Grease Table
04-150 Gear Drive Operation
MAGNA-SAFE MSS
Mixers Bulletin 04-150
12/16/02
Gear Drive Operation
Electric motors furnished on agitators are designed to deliver their rated output when properly installed and maintained.
Gearing and bearings are lubricated. The gear drive has been filled with the proper amount and type of lubricant before operation. Refer to the lubrication section of this manual. Improper lubrication will result in damage to gearing and bearings in a very short time.