INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS
FOR
MSS SERIES
02-051 Installation - Single Angular contact bearing
02-060 Mixer Positioning
03-190 Recommended Grease Table
MAGNA-SAFE MSS
Mixers Bulletin 02-060
1/20/03
Mixer Positioning Data
The MSS should be mounted horizontally one turbine diameter off bottom to the centerline of the shaft as a standard.
It should also be mounted at an angle of 7 to 10 degrees to the left of tank center when looking towards the center of the tank.
Contact the factory for multiple mixers on one tank.