Home

INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS FOR

MSS SERIES

 

Table of Contents

01-050 Initial Inspection

01-100 Storage MST

01-125 Warranty

01-150 Field Service Rates

01-200 Bolt Tightening

02-050 Installation MSS

02-051 Installation - Single Angular contact bearing

02-060 Mixer Positioning

03-100 Motor Lubrication

03-150 Gearbox Lubrication

03-190 Recommended Grease Table

04-050 Mixer Operation

04-100 Motor Operation

04-150 Gear Drive Operation

05-150 Maintenance Gear Drive MSS

06-050 Trouble Shooting Guide

07-050 Parts List MSS

 

MAGNA-SAFE
Mixers Bulletin 01-050
10/6/03
INITIAL INSPECTION

Step 1: Inspect crates. Upon receipt, inspect all crates and equipment for shipping damage. Report shipping damage to Magna-Sage International. A claim should be filed immediately with the carrier involved.

Step 2: Uncrate. Check the contents. Do not uncrate the unit until you have read the Installation section of this manual and looked at the assembly drawing. Be careful in uncrating and handling. Do not discard the crating without carefully making sure that all the agitator parts have been removed. Correct assembly of this unit requires referring to both the unit assembly drawing and this manual.

Step 3: Questions? Call Magna-Safe. If the shipment is not complete or you do not understand what you have received, please contact Magna-Safe International.


Magna-Safe International, Inc.
P.O. Box 447
Old Bridge, NJ 08857-0447

Toll Free: (866) 626-8885
Telephone: (732) 603-2188
Fax:(732) 972-0393
email: info@magnasafe.com