Magna-Safe

MAGNA-SAFE MSB
Mixers Bulletin 05-150
12/16/02

Maintenance - Gear Drive

The gear drive on this agitator has been charged at the factory with a special lubricant which need not be changed for the life of the unit. Should any problem arise involving damage to the gear drive, replace the reducer in its entirety.

Tighten the bolts at the motor to the gear drive and the gear drive to the pedestal. Torque to the values shown in Bulletin 01-200.

The motor shaft fits in a quill in the gear drive. There is no flexible coupling. There is a key to transmit the motor torque.

The output shaft on the gear drive is fitted with a key-driven rigid coupling half. The outer magnet bank is located on the coupling half.


Home		INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS FOR MSB SERIES
Table of Contents 01-050 Initial Inspection 01-100 Storage MSB 01-125 Warranty 01-150 Field Service Rates 01-200 Bolt Tightening 02-050 Installation MSB 02-060 Mixer Positioning 03-100 Motor Lubrication 03-150 Gearbox Lubrication 03-190 Recommended Grease Table 04-050 Mixer Operation 04-100 Motor Operation 04-150 Gear Drive Operation 05-150 Maintenance Gear Drive MSB 06-050 Trouble Shooting Guide 07-050 Parts List MSB 07-060 Parts List MSB		MAGNA-SAFE MSB Mixers Bulletin 05-150 12/16/02 Maintenance - Gear Drive The gear drive on this agitator has been charged at the factory with a special lubricant which need not be changed for the life of the unit. Should any problem arise involving damage to the gear drive, replace the reducer in its entirety. Tighten the bolts at the motor to the gear drive and the gear drive to the pedestal. Torque to the values shown in Bulletin 01-200. The motor shaft fits in a quill in the gear drive. There is no flexible coupling. There is a key to transmit the motor torque. The output shaft on the gear drive is fitted with a key-driven rigid coupling half. The outer magnet bank is located on the coupling half.